Materials
Wood, steel and glass
We work with only three materials: solid wood, steel and glass. Here is how we work each of them and why it takes time.

01 · Wood
Solid wood, not chipboard
Every piece is made of solid planks and beams. No veneer, no foil: what you see is real wood all the way through, with knots, cracks and grain.
How we work
- 01Selection
We choose every board by hand for grain, knots and moisture. Not every board is good enough for a table top.
- 02Drying and resting
Wood moves. Before we work it, it has to be dry and adapt to indoor climate, otherwise it warps later in your home.
- 03Cutting and gluing
The planks are cut to your dimensions and glued into tops. Every glue joint stays under pressure overnight.
- 04Texture
Depending on the series, the surface is brushed, flamed or sanded in several grits. This creates the texture you can feel.
- 05Finish
Oil, wax or lacquer go on in several coats. Each coat has to dry before the next one.
Why: Solid wood can be sanded and re-oiled after years. A scratch is not the end, it becomes part of the story.

02 · Steel
Steel, fitted by hand
The steel bands, brackets and frames are not just decoration: they carry and hold the wood. They are made for each piece individually.
How we work
- 01Cutting
Profiles and flat steel are sawn and drilled to your dimensions.
- 02Welding and fitting
Frames are welded and bands fitted to the wood. Because every piece of wood is a little different, we fit every band individually.
- 03Grinding
Welds and edges are ground and deburred so nothing is sharp.
- 04Finish
The steel is coated or patinated and sealed so it does not rust and keeps its colour.
Why: Wood and steel together make a structure that does not wobble and lasts for decades, even with heavy tops.

03 · Glass
Safety glass made to measure
For table tops and shelves we use toughened safety glass. It is much stronger than ordinary glass and breaks into small blunt pieces.
How we work
- 01Measuring
Only when the wooden frame is finished do we measure the exact glass size.
- 02Toughened to size
Safety glass cannot be cut after toughening. So every pane is cut and toughened individually for your piece.
- 03Edges
The edges are ground and polished so they are smooth and safe.
- 04Assembly
The glass rests on pads that protect it from pressure points. Finally we check that everything lies flat.
Why: Glass keeps the wood visible and makes the surface easy to clean. Made to measure, it fits exactly.
Why it takes longer
Bought in a day, made in weeks
Furniture from a store is already finished in a warehouse. Ours only starts when you order. That is the reason for 4–6 weeks.
| - | Factory furniture | CHYRKA |
|---|---|---|
| Material | Chipboard or MDF with foil or veneer | Solid wood, steel, safety glass |
| Size | Fixed standard sizes | Your dimensions, to the centimetre |
| Production | Mass production for stock | One piece, made after your order |
| Drying | None | Glue, oil and coatings need their time |
| Repair | Usually impossible | Sand, re-oil, tighten |
| Delivery | A few days from stock | 4–6 weeks after payment |
What happens in those weeks
- Week 1Select the wood, let it rest, cut it
- Week 2Glue the tops, make the steel parts
- Week 3Texture, sanding, first coats of oil or lacquer
- Week 4Drying, glass made to measure, assembly
- Week 5–6Final check, packing on a pallet, handover to the carrier